# packages

pkgId: 86984ac8fa499e2eb78454905725d739efd0f220bc2c436151191320739c0a43
name: libpri
arch: x86_64
version: 1.4.15
epoch: 0
release: 0.el7.centos
summary: An implementation of Primary Rate ISDN
url: http://www.asterisk.org/
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libpri-1.4.15-0.el7.centos.src.rpm
location_href: RPMS/libpri-1.4.15-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  libpri is a C implementation of the Primary Rate ISDN specification.
  It was based on the Bellcore specification SR-NWT-002343 for National
  ISDN.  As of May 12, 2001, it has been tested work with NI-2, Nortel
  DMS-100, and Lucent 5E Custom protocols on switches from Nortel and
  Lucent.


pkgId: 12e38d6c7109f3181e21dd58c6c3b035f547f8f7990bb81d22473624354a250d
name: lcdelastix
arch: noarch
version: 4.0.0
epoch: 0
release: 2
summary: LCDproc client for Elastix status display
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: lcdelastix-4.0.0-2.src.rpm
location_href: RPMS/lcdelastix-4.0.0-2.noarch.rpm
checksum_type: sha256
description:
  This is a daemon and a set of utilities that implement the Elastix status
  output in the LCD display of Elastix appliances. This daemon should not be
  running on a device without a LCD display, unless you know what you are doing.


pkgId: 7869dc881828c0903124ce838c8f2d733cf4b0839a6cc48a3424eb33c68f6404
name: asterisk-addons
arch: x86_64
version: 11.21.0
epoch: 2009020507
release: 0.el7.centos
summary: Additional addons for Asterisk: the Open Source Linux PBX
url: http://www.asterisk.org
rpm_license: GPL
rpm_group: Applications/Internet
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: asterisk-11.21.0-0.el7.centos.src.rpm
location_href: RPMS/asterisk-addons-11.21.0-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  Asterisk is a complete PBX in software. It runs on Linux and provides
  all of the features you would expect from a PBX and more. Asterisk
  does voice over IP in three protocols, and can interoperate with
  almost all standards-based telephony equipment using relatively
  inexpensive hardware.
  This package contains additional addons for asterisk.


pkgId: 519e7b5388c05219837229f57a5f1b4d0d5fb291a38f9c1dbf4cbc48235c939f
name: libopenr2
arch: x86_64
version: 1.3.3
epoch: 0
release: 1.el7.centos
summary: MFC/R2 call setup library
url: http://www.libopenr2.org/
rpm_license: LGPL
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libopenr2-1.3.3-1.el7.centos.src.rpm
rpm_packager: Alex Villacis Lasso <a_villacis@palosanto.com>
location_href: RPMS/libopenr2-1.3.3-1.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  OpenR2 is a library that implements the MFC/R2 signalling over E1 lines using
  the Zapata Telephony interface. The MF R2 tones required for the signaling are
  generated by code borrowed from the LGPL library SpanDSP written by Steve Underwood,
  the user has the option to provide a MF interface to use his own MF R2 tone generation
  and detection so the library will use them when needed, that's why this library does not
  depend directly on spandsp, libteletone or zaptel for tone generation and detection
  (depends on zaptel for ABCD bits and general media transmission though)


pkgId: 2603cae6742da2c59fabb237c4511d11f81dc7e0c0716ae7a68e4ce5c239390f
name: elastix-a2billing-callback_daemon
arch: noarch
version: 1.9.4
epoch: 0
release: 7
summary: This Package provide a callback daemon for a2billing
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: elastix-a2billing-1.9.4-7.src.rpm
location_href: RPMS/elastix-a2billing-callback_daemon-1.9.4-7.noarch.rpm
checksum_type: sha256
description:
  A2billing is a full featured telecom platform and softswitch providing converged
  services, with self contained billing (pre or post-paid), reporting and statistics
  for IP and TDM based voice networks and can be configured to supply a wide range
  of services, rate calls, prepare and send out invoices, as well as accept
  payments via a number of payment service providers.

  This Package provide a callback daemon for a2billing.


pkgId: 26b7011f94a09be07cc29b3cdef62d338e657c2fc5199fa5580255f6ee7941c1
name: asterisk
arch: x86_64
version: 11.25.3
epoch: 2009020507
release: 3.el7.centos
summary: The Open Source Linux PBX
url: http://www.asterisk.org
rpm_license: GPL
rpm_group: Applications/Internet
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: asterisk-11.25.3-3.el7.centos.src.rpm
location_href: RPMS/asterisk-11.25.3-3.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  Asterisk is a complete PBX in software. It runs on Linux and provides
  all of the features you would expect from a PBX and more. Asterisk
  does voice over IP in three protocols, and can interoperate with
  almost all standards-based telephony equipment using relatively
  inexpensive hardware.


pkgId: f1d7ab73b72fa35057fa8607efc3e1f8eca86419ab1788fb237ce829de85d469
name: libwat
arch: x86_64
version: 1.0.25
epoch: 0
release: 0
summary: Library for Wanpipe GSM AT support
url: http://wiki.sangoma.com/libwat
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libwat-1.0.25-0.src.rpm
location_href: RPMS/libwat-1.0.25-0.x86_64.rpm
checksum_type: sha256
description:
  LibWAT is an open source library that encapsulates the protocols used to communicate with Wireless GSM modules.

  LibWAT is a dependency for Asterisk and DAHDI if GSM signaling is used.

  LibWAT is still in beta phase.


pkgId: e123486db89e69caf1419185e67557d0868c286f61727502b208498dd4fde262
name: kmod-rhino
arch: x86_64
version: 0.99.7
epoch: 2
release: 0
summary: Rhino Telephony interface support
url: http://www.rhinoequipment.com/
rpm_license: GPL
rpm_vendor: Rhino Equipment Corp
rpm_group: System Environment/Libraries
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: rhino-0.99.7-0.src.rpm
rpm_packager: James Finstrom <james@rhinoequipment.com>
location_href: RPMS/kmod-rhino-0.99.7-0.x86_64.rpm
checksum_type: sha256
description:
  Kernel Module - Rhino Telephony Drivers for 3.10.0-229.14.1.el7.x86_64 this package should work on dahdi 2.10.2


pkgId: f77727f85b68fc7e7d89ce02d8621173000ff8a2b724480211c8d59c6839a339
name: elastix-a2billing
arch: noarch
version: 1.9.4
epoch: 0
release: 7
summary: Package that installs A2Billing.
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: elastix-a2billing-1.9.4-7.src.rpm
location_href: RPMS/elastix-a2billing-1.9.4-7.noarch.rpm
checksum_type: sha256
description:
  A2billing is a full featured telecom platform and softswitch providing converged
  services, with self contained billing (pre or post-paid), reporting and statistics
  for IP and TDM based voice networks and can be configured to supply a wide range
  of services, rate calls, prepare and send out invoices, as well as accept
  payments via a number of payment service providers.


pkgId: 57764967d02113ddbb64f9281fd9bc3e38d2d126e9a5c3f13d850d969062487c
name: kmod-wanpipe
arch: x86_64
version: 7.0.14.3
epoch: 0
release: 0
url: www.sangoma.com
rpm_license: GPL plus freely redistributable binaries
rpm_vendor: Sangoma Technologies Inc.
rpm_group: Applications/Communications
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: wanpipe-util-7.0.14.3-0.src.rpm
location_href: RPMS/kmod-wanpipe-7.0.14.3-0.x86_64.rpm
checksum_type: sha256
summary:
  Sangoma WANPIPE package for Linux. It contains the WANPIPE kernel drivers.  Please install wanpipe-util package for wanpipe utilties and configuration files.

description:
  Linux Drivers for Sangoma AFT Series of cards and S Series of Cards. Wanpipe
  supports the following protocols, TDM Voice, Frame Relay, X25(API),
  PPP,Multi-link PPP, CHDLC and custom API development for WAN and Voice.
  Compiled for: 3.10.0-229.14.1.el7.x86_64 (x86_64)

  Install Wanpipe-util package for wanpipe utilities and configuration files.


pkgId: f4f3737e6b153c6c906a9bbab9d8d5db52fcc1e051e971b1a9e7e282a9a75923
name: dahdi-debuginfo
arch: x86_64
version: 2.10.2
epoch: 0
release: 0.el7.centos
summary: Debug information for package dahdi
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: dahdi-2.10.2-0.el7.centos.src.rpm
location_href: RPMS/dahdi-debuginfo-2.10.2-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package dahdi.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5a5dfe04602b3061dc062262c76d7fe57d58dd922c460e3593c7722db7b47bf5
name: libss7-devel
arch: x86_64
version: 1.0.1
epoch: 0
release: 3.el7.centos
summary: Development files for libss7
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: Development/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libss7-1.0.1-3.el7.centos.src.rpm
location_href: RPMS/libss7-devel-1.0.1-3.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  The libss7-devel package contains libraries and header files for
  developing applications that use libss7.


pkgId: 17744fa42c0d88a4e322f226aa4f622ff504cab1167daed7172fbf04590e2ab9
name: python-eventlet
arch: noarch
version: 0.16.1
epoch: 0
release: 1.el7.centos
summary: Highly concurrent networking library
url: http://eventlet.net
rpm_license: MIT
rpm_group: Development/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: python-eventlet-0.16.1-1.el7.centos.src.rpm
location_href: RPMS/python-eventlet-0.16.1-1.el7.centos.noarch.rpm
checksum_type: sha256
description:
  Eventlet is a networking library written in Python. It achieves high
  scalability by using non-blocking io while at the same time retaining
  high programmer usability by using coroutines to make the non-blocking
  io operations appear blocking at the source code level.


pkgId: 5713cbbd90c0511e2e4703b92c859f9334912ae18721226054b5f56a7d2b9fcf
name: asterisk-debuginfo
arch: x86_64
version: 11.25.3
epoch: 2009020507
release: 3.el7.centos
summary: Debug information for package asterisk
url: http://www.asterisk.org
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: asterisk-11.25.3-3.el7.centos.src.rpm
location_href: RPMS/asterisk-debuginfo-11.25.3-3.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package asterisk.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: dcaa99995c7d8d3a451a3dfac337c0f3600f13f1733886dc9cca2abb48702e2d
name: wanpipe-util-debuginfo
arch: x86_64
version: 7.0.14.3
epoch: 0
release: 0
summary: Debug information for package wanpipe-util
url: www.sangoma.com
rpm_license: GPL plus freely redistributable binaries
rpm_vendor: Sangoma Technologies Inc.
rpm_group: Development/Debug
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: wanpipe-util-7.0.14.3-0.src.rpm
location_href: RPMS/wanpipe-util-debuginfo-7.0.14.3-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package wanpipe-util.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 79a4d73716da328e67772468b21f8e1a6868ddde1ff25b0b61ef8c6ef665bee3
name: hylafax
arch: x86_64
version: 4.3.11
epoch: 20150304
release: 1rh7
summary: HylaFAX(tm) is a sophisticated enterprise strength fax package
url: http://www.ifax.com/
rpm_license: better than LGPL
rpm_group: Applications/Communications
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: hylafax-4.3.11-1rh7.src.rpm
rpm_packager: Darren Nickerson <darren.nickerson@ifax.com>
location_href: RPMS/hylafax-4.3.11-1rh7.x86_64.rpm
checksum_type: sha256
description:
  HylaFAX(tm) is a sophisticated enterprise-strength fax package for
  class 1 and 2 fax modems on unix systems. It provides spooling
  services and numerous supporting fax management tools.
  The fax clients may reside on machines different from the server
  and client implementations exist for a number of platforms including
  windows.


pkgId: afddfc1a79c49faf5a87a533204ff471f0a950ce87594563ec3ef931a727b06e
name: libopenr2-devel
arch: x86_64
version: 1.3.3
epoch: 0
release: 1.el7.centos
summary: Development files for libopenr2
url: http://www.libopenr2.org/
rpm_license: LGPL
rpm_group: Development/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libopenr2-1.3.3-1.el7.centos.src.rpm
rpm_packager: Alex Villacis Lasso <a_villacis@palosanto.com>
location_href: RPMS/libopenr2-devel-1.3.3-1.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  The libopenr2-devel package contains libraries and header files for
  developing applications that use libopenr2.


pkgId: 035401c5cb64b4e8fc91a0585aefa38c89a487bec59198811311ba7f20d146d2
name: elastix-portknock
arch: x86_64
version: 0.0.1
epoch: 0
release: 0
summary: Single-packet port-knocking utility for Elastix
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: elastix-portknock-0.0.1-0.src.rpm
rpm_packager: Palosanto Solutions
location_href: RPMS/elastix-portknock-0.0.1-0.x86_64.rpm
checksum_type: sha256
description:
  This is a simple program to implement a single-packet authentication system for
  Elastix on selected network interfaces. This program only verifies that the
  payload is a well-formed port knocking packet. The actual decryption is
  delegated to the helper program specified in the command line.


pkgId: 4e2fc84577dc2e3991620d61983b1078033110542a7134c37ac532073ff8f7bd
name: asterisk-addons-chan_mobile
arch: x86_64
version: 11.25.3
epoch: 2009020507
release: 3.el7.centos
summary: Channel driver for bluetooth mobile phones
url: http://www.asterisk.org
rpm_license: GPL
rpm_group: Applications/Internet
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: asterisk-11.25.3-3.el7.centos.src.rpm
location_href: RPMS/asterisk-addons-chan_mobile-11.25.3-3.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  Channel driver for mobile devices. Currently only supports bluetooth, but may
  allow more technologies (such as USB) in the future.


pkgId: 90a6ff14ad36a69f9d5828c9a585ea7051a81b3d789b58b2740c23087f75aa9a
name: lcdproc
arch: x86_64
version: 0.5.6
epoch: 1
release: 1
summary: Linux LCD display driver
url: http://www.lcdproc.org
rpm_license: GPL
rpm_group: Applications/Internet
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: lcdproc-0.5.6-1.src.rpm
location_href: RPMS/lcdproc-0.5.6-1.x86_64.rpm
checksum_type: sha256
description:
  LCDproc is a piece of software that displays real-time system information from your Linux/*BSD box on a LCD.


pkgId: fbdd53fe487bed0189537832e3706820768031ff505561aa31a3c76d72d6e37a
name: elastix-firstboot
arch: noarch
version: 4.0.0
epoch: 0
release: 3
summary: Elastix First Boot Setup
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: elastix-firstboot-4.0.0-3.src.rpm
location_href: RPMS/elastix-firstboot-4.0.0-3.noarch.rpm
checksum_type: sha256
description:
  This module contains (or should contain) utilities and configurations that
  cannot be prepared at install time from the ISO image, and are therefore
  delayed until the first boot of the newly installed system. The main aim of
  this script is to replace elastix-mysqldbdata until all RPMS are able to
  either prepare their databases on their own, or delegate this task to this
  package.


pkgId: 98eedbc5615287206d529e79e6c6caa046d003b747977fd5269706ba2a0b1977
name: iaxmodem
arch: x86_64
version: 1.2.0
epoch: 0
release: 2.el7.centos
summary: Software modem for interfacing Asterisk and Hylafax via IAX2
url: https://sourceforge.net/projects/iaxmodem
rpm_license: GPL
rpm_vendor: Lee Howard <faxguy@howardsilvan.com>
rpm_group: Applications/Communications
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: iaxmodem-1.2.0-2.el7.centos.src.rpm
rpm_packager: Laimbock Consulting <asterisk@laimbock.com>
location_href: RPMS/iaxmodem-1.2.0-2.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  IAXmodem is a software modem written in C that uses an IAX channel
  (commonly provided by an Asterisk PBX system) instead of a traditional
  phone line and uses a DSP library instead of DSP hardware chipsets.

  To accomplish this, then, IAXmodem interfaces an IAX library known as
  libiax2 with a DSP library known as spandsp, and then IAXmodem interfaces
  the DSP library with a tty device node for interfacing with modem
  applications.


pkgId: 8558c348681bdcb628d54e01419f6bea8db29ff9bb4623c5623af271b7c07fc4
name: php-magpierss
arch: noarch
version: 0.72
epoch: 0
release: 3.fc17
summary: MagpieRSS is an RSS parser written in PHP
url: http://magpierss.sourceforge.net/
rpm_license: GPL
rpm_group: Development/Libraries
rpm_buildhost: rpmbuild-arm.elastix.palosanto.com
rpm_sourcerpm: php-magpierss-0.72-3.fc17.src.rpm
location_href: RPMS/php-magpierss-0.72-3.fc17.noarch.rpm
checksum_type: sha256
description:
  MagpieRSS is a set of php files designed to parse RSS
  XML for usage in PHP code.  MagpieRSS is compatible with
  RSS 0.9 through RSS 1.0.


pkgId: e4208bee672c26b7026b822efbf6c488e96db91316a3a79acc23f7f99c2a8fe1
name: openfire
arch: noarch
version: 3.7.1
epoch: 0
release: 2
summary: Openfire XMPP Server
url: http://www.igniterealtime.org/
rpm_license: Apache license v2.0
rpm_vendor: Jive Software
rpm_group: Applications/Communications
rpm_buildhost: localhost
rpm_sourcerpm: openfire-3.7.1-2.src.rpm
rpm_packager: Jive Software
location_href: RPMS/openfire-3.7.1-2.noarch.rpm
checksum_type: sha256
description:
  Openfire is a leading Open Source, cross-platform IM server based on the
  XMPP (Jabber) protocol. It has great performance, is easy to setup and use,
  and delivers an innovative feature set.

  This particular release is compiled and linked against the standard CentOS 5
  JRE.


pkgId: 231d679b18a89d960c8624fc6803df15920766472cafa6091691a83292382947
name: python-cjson
arch: x86_64
version: 1.0.5
epoch: 0
release: 2.el7.centos
summary: Fast JSON encoder/decoder for Python
url: http://pypi.python.org/pypi/python-cjson
rpm_license: LGPLv2+
rpm_group: Development/Languages
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: python-cjson-1.0.5-2.el7.centos.src.rpm
location_href: RPMS/python-cjson-1.0.5-2.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  JSON stands for JavaScript Object Notation and is a text based lightweight
  data exchange format which is easy for humans to read/write and for machines
  to parse/generate. JSON is completely language independent and has multiple
  implementations in most of the programming languages, making it ideal for
  data exchange and storage.

  The module is written in C and it is up to 250 times faster when compared to
  the other python JSON implementations which are written directly in python.
  This speed gain varies with the complexity of the data and the operation and
  is the the range of 10-200 times for encoding operations and in the range of
  100-250 times for decoding operations.


pkgId: 25df0e800d7be0ee3a754a81081fdc43056ca37dc6368cc4739f84f2cb8df169
name: elastix-endpointconfig2
arch: noarch
version: 4.0.0
epoch: 0
release: 2
summary: Elastix Module Distributed Dial Plan
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: elastix-endpointconfig2-4.0.0-2.src.rpm
location_href: RPMS/elastix-endpointconfig2-4.0.0-2.noarch.rpm
checksum_type: sha256
description:
  The Elastix Endpoint Configurator is a complete rewrite and reimplementation of
  the elastix-pbx module known as the Endpoint Configurator. This rewrite
  addresses several known design flaws in the old Endpoint Configurator and should
  eventually be integrated as the new standard configurator in elastix-pbx.

  User-visible features:
  - Supports assignment of multiple accounts to a single endpoint.
  - Automatic model detection implemented for most supported manufacturers.
  - Improved user interface written with Ember.js.
  - Network parameters can be updated onscreen in addition to being uploaded.
  - Endpoint network scan is cancellable.
  - The configuration of every endpoint is executed in parallel, considerably
    shortening the potential wait until all endpoints are configured.
  - A log of the actual endpoint configuration can be displayed for diagnostics.
  - Supports two additional download formats in addition to the download format of
    the old endpoint configurator - required for multiple account support.
  - Custom properties can be assigned to the endpoint and per account, until GUI
    support is properly added.
  - Can be installed alongside the old endpoint configurator.
  - For supported phones, the module provides an HTTP resource to serve remote
    services, such as a phonebook browser, for better integration with Elastix.

  For developers:
  - The architecture of the module is plugin-friendly. Each vendor implementation
    (written in Python) has been completely encapsulated and no vendor-specific
    logic remains in the module core itself. To add a new vendor, it is enough to
    write a new implementation class in Python, add new templates if necessary,
    and add database records for MACs. Patching of the core is no longer required.
  - Foundation for replacing the standard configurator dialog with a
    vendor-specific one (not yet used).


pkgId: 3c96b7121aceb87f1f4e64d1fecc0a76c989f81993ccd23014fde35af508cc5d
name: wanpipe-util
arch: x86_64
version: 7.0.14.3
epoch: 0
release: 0
url: www.sangoma.com
rpm_license: GPL plus freely redistributable binaries
rpm_vendor: Sangoma Technologies Inc.
rpm_group: Networking/WAN
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: wanpipe-util-7.0.14.3-0.src.rpm
location_href: RPMS/wanpipe-util-7.0.14.3-0.x86_64.rpm
checksum_type: sha256
summary:
  Sangoma WANPIPE package for Linux. It contains WANPIPE configuration/startup/debugging utilities for Linux. This package requires the wanpipe-mod package!

description:
  Linux Utilities for Sangoma AFT-Series of cards and S-Series of Cards. Wanpipe
  supports the following protocols, TDM Voice, Frame Relay, X25(API),
  PPP,Multi-link PPP, CHDLC and custom API development for WAN and Voice.

  Install Wanpipe-modules package for wanpipe drivers.


pkgId: 7acac97c194e477facb74f94d403c488c05a21ed9355e69490af2cbccc9aea63
name: freePBX
arch: noarch
version: 2.11.0
epoch: 0
release: 26
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: localhost
rpm_sourcerpm: freePBX-2.11.0-26.src.rpm
location_href: RPMS/freePBX-2.11.0-26.noarch.rpm
checksum_type: sha256
summary:
  FreePBX® is the most powerful GUI configuration tool for Asterisk. It provides everything that a standard legacy phone system can, plus a huge amount of new features.

description:
  FreePBX® is the most powerful GUI configuration tool for Asterisk. It provides everything that a standard legacy phone system can, plus a huge amount of new features.
  FreePBX® is a Registered Trademark of Sangoma. For more details visit www.freepbx.org and www.schmoozecom.com.


pkgId: 7a1580c25ab214830cd10d01978898dd6a470ebbab77f5fdced715a3914d545f
name: py-Asterisk
arch: noarch
version: 0.5.2
epoch: 0
release: 1.fc17
summary: Python bindings for Asterisk Manager API
url: http://code.google.com/p/py-asterisk/
rpm_license: MIT
rpm_group: Development/Languages
rpm_buildhost: rpmbuild-arm.elastix.palosanto.com
rpm_sourcerpm: py-Asterisk-0.5.2-1.fc17.src.rpm
location_href: RPMS/py-Asterisk-0.5.2-1.fc17.noarch.rpm
checksum_type: sha256
description:
  The Python Asterisk package (codenamed py-Asterisk) is an attempt to produce
  high quality, well documented Python bindings for the Asterisk Manager API.

  The eventual goal of the package is to allow rich specification of the Asterisk
  configuration in Python rather than in the quirky, unstructured, undocumented
  mess that we call the Asterisk configuration files.


pkgId: 041da0120b8fe890d9531752d85cd0623f1eef08295c2eaa9ee34629b4212e5b
name: kmod-dahdi
arch: x86_64
version: 2.10.2
epoch: 0
release: 0.el7.centos
summary: Kernel modules required for some hardware to operate with Dahdi
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System Environment/Kernel
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: dahdi-2.10.2-0.el7.centos.src.rpm
location_href: RPMS/kmod-dahdi-2.10.2-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package contains the dahdi kernel modules for the Linux kernel package :
  3.10.0-229.14.1.el7.x86_64 (x86_64).


pkgId: 0a7676d85996040fce69a8fedbc738b118e9f3b4fd718125af814962a3c4fafc
name: spandsp
arch: x86_64
version: 0.0.6
epoch: 0
release: 0.8.pre21.el7.centos
summary: A DSP library for telephony
url: http://www.soft-switch.org/
rpm_license: LGPLv2 and GPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: spandsp-0.0.6-0.8.pre21.el7.centos.src.rpm
location_href: RPMS/spandsp-0.0.6-0.8.pre21.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  SpanDSP is a library of DSP functions for telephony, in the 8000
  sample per second world of E1s, T1s, and higher order PCM channels. It
  contains low level functions, such as basic filters. It also contains
  higher level functions, such as cadenced supervisory tone detection,
  and a complete software FAX machine. The software has been designed to
  avoid intellectual property issues, using mature techniques where all
  relevant patents have expired. See the file DueDiligence for important
  information about these intellectual property issues.


pkgId: 7aed841a11881d5ed660a54bf1b674916f2110b2e9f41efdd5217b589412c6bc
name: py-Asterisk
arch: noarch
version: 0.5.10
epoch: 0
release: 1.el7.centos
summary: Python bindings for Asterisk Manager API
url: https://github.com/jeansch/py-asterisk/
rpm_license: MIT
rpm_group: Development/Languages
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: py-Asterisk-0.5.10-1.el7.centos.src.rpm
location_href: RPMS/py-Asterisk-0.5.10-1.el7.centos.noarch.rpm
checksum_type: sha256
description:
  The Python Asterisk package (codenamed py-Asterisk) is an attempt to produce
  high quality, well documented Python bindings for the Asterisk Manager API.

  The eventual goal of the package is to allow rich specification of the Asterisk
  configuration in Python rather than in the quirky, unstructured, undocumented
  mess that we call the Asterisk configuration files.

  Due to the use of absolute_import, this version requires python 2.6 or later.


pkgId: fd641aed6a3af6c6aa815a6287c308a617f3d6be6c77e2b93284dea15b0b9a24
name: dahdi-devel
arch: x86_64
version: 2.10.2
epoch: 0
release: 0.el7.centos
summary: Header files and development libraries for DAHDI
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: Development/Libraries
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: dahdi-2.10.2-0.el7.centos.src.rpm
location_href: RPMS/dahdi-devel-2.10.2-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package contains the header files needed to compile applications that
  will use DAHDI, such as Asterisk. It also contains header files to build
  additional kernel modules that request source access to the dahdi kernel
  files.


pkgId: c26ac1a24126c714e14ebe990d70e7d59ac2984d91fd232c600085360810b1b7
name: libsrtp
arch: x86_64
version: 1.5.2
epoch: 0
release: 0
summary: Open-source implementation of the Secure Real-time Transport Protocol (SRTP)
url: https://github.com/cisco/libsrtp
rpm_license: BSD
rpm_group: System Environment/Libraries
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: libsrtp-1.5.2-0.src.rpm
location_href: RPMS/libsrtp-1.5.2-0.x86_64.rpm
checksum_type: sha256
description:
  The libSRTP library is an open-source implementation of the Secure Real-time
  Transport Protocol (SRTP) originally authored by Cisco Systems, Inc. It is
  available under a BSD-style license.

  SRTP is a security profile for RTP that adds confidentiality, message
  authentication, and replay protection to that protocol. It is specified in RFC
  3711.


pkgId: aaec0afda002e06cb6c1350dfd3b0055dbccdc68f8e1e2fb83c7ff97e2a92cee
name: dahdi
arch: x86_64
version: 2.10.2
epoch: 0
release: 0.el7.centos
summary: Telephony interface support
url: http://www.asterisk.org/
rpm_license: GPL
rpm_group: System Environment/Libraries
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: dahdi-2.10.2-0.el7.centos.src.rpm
location_href: RPMS/dahdi-2.10.2-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  This package contains the libraries, device entries, startup scripts and tools
  needed to use Digium telephony hardware. This includes the pseudo TDM
  interfaces.

  You will also need to install a kernel modules package matching your current
  kernel for everything to work, and edit /etc/modprobe.conf.


pkgId: f30ddc2ba947c0c810e67e5b5212d77e743e54050dd3aa9164d2859481153600
name: php-jpgraph
arch: noarch
version: 3.0.7
epoch: 0
release: 0
summary: JpGraph is an Object-Oriented Graph creating library for PHP from 5.1 to 5.5
url: http://jpgraph.net
rpm_license: QPL 1.0
rpm_group: Development/Libraries
rpm_buildhost: localhost
rpm_sourcerpm: php-jpgraph-3.0.7-0.src.rpm
location_href: RPMS/php-jpgraph-3.0.7-0.noarch.rpm
checksum_type: sha256
description:
  JpGraph is an Object-Oriented Graph creating library for PHP from 5.1 to 5.5 The
  library is completely written in PHP and ready to be used in any PHP scripts
  (both CGI/APXS/CLI versions of PHP are supported).

  This package contains the main libraries.


pkgId: f1ccca2cb2f515532ddb155b641c6a6425c5280145f4df5d6f75935ef33118f7
name: libgsmat
arch: x86_64
version: 2.0.8
epoch: 0
release: 0.el7.centos
summary: GSM AT interface library for OpenVox G400P GSM/CDMA cards
url: http://www.chan-extra.org/index.php/Main_Page
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libgsmat-2.0.8-0.el7.centos.src.rpm
location_href: RPMS/libgsmat-2.0.8-0.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  libgsmat is an userspace library, part of the chan_extra project. It implements
  routines for interfacing with OpenVox G400P GSM/CDMA cards through AT commands.


pkgId: 493efe9133aee35dc9b4df1530a989a26ad99e39fa6030c2ccd31e273a641840
name: libss7
arch: x86_64
version: 1.0.1
epoch: 0
release: 3.el7.centos
summary: SS7 protocol services to applications
url: http://www.asterisk.org/
rpm_license: GPLv2
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: libss7-1.0.1-3.el7.centos.src.rpm
location_href: RPMS/libss7-1.0.1-3.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  libss7 is a userspace library that is used for providing SS7 protocol
  services to applications.  It has a working MTP2, MTP3, and ISUP for
  ITU and ANSI style SS7, however it was written in a manner that will
  easily allow support for other various national specific variants in
  the future.


pkgId: 968c0d5c73dafe1cc224048757aa2d56b2c4a23a7b9c5cedacda0cb4c921754c
name: liballogsmat
arch: x86_64
version: 2.0.7
epoch: 0
release: 1.el7.centos
summary: GSM AT interface library for AlloGSM GSM/CDMA cards
rpm_license: GPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: centos7-rpmtest.palosanto.com
rpm_sourcerpm: liballogsmat-2.0.7-1.el7.centos.src.rpm
location_href: RPMS/liballogsmat-2.0.7-1.el7.centos.x86_64.rpm
checksum_type: sha256
description:
  libgsmat is an userspace library, part of the chan_extra project. It implements
  routines for interfacing with OpenVox G400P GSM/CDMA cards through AT commands.

  This version of the package has been patched for AlloGSM cards.


pkgId: 3f891669d578968592169bf9d13dc09dc2afebbdfd72310c98c21acb7172b918
name: libsrtp-devel
arch: x86_64
version: 1.5.2
epoch: 0
release: 0
summary: Development files for libsrtp
url: https://github.com/cisco/libsrtp
rpm_license: BSD
rpm_group: Development/Libraries
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: libsrtp-1.5.2-0.src.rpm
location_href: RPMS/libsrtp-devel-1.5.2-0.x86_64.rpm
checksum_type: sha256
description:
  The libsrtp-devel package contains libraries and header files for
  developing applications that use libsrtp.


pkgId: bfe88c31ff38761852bdf2514b0fa3e2f7dcd8cf8ccde37239172eeb2d74bdd9
name: rhino-debuginfo
arch: x86_64
version: 0.99.7
epoch: 2
release: 0
summary: Debug information for package rhino
url: http://www.rhinoequipment.com/
rpm_license: GPL
rpm_vendor: Rhino Equipment Corp
rpm_group: Development/Debug
rpm_buildhost: IsoBuilderElx3C7-x64
rpm_sourcerpm: rhino-0.99.7-0.src.rpm
rpm_packager: James Finstrom <james@rhinoequipment.com>
location_href: RPMS/rhino-debuginfo-0.99.7-0.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package rhino.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 47467f876f978ee0b4ceefc305ecb5e7924dbde3e0226d015b9bbcf331745a8f
name: freePBX
arch: noarch
version: 2.11.0
epoch: 0
release: 19
rpm_license: GPL
rpm_group: Applications/System
rpm_buildhost: localhost
rpm_sourcerpm: freePBX-2.11.0-19.src.rpm
location_href: RPMS/freePBX-2.11.0-19.noarch.rpm
checksum_type: sha256
summary:
[cell repeats an earlier one in this file: 166 characters]

description:
  FreePBX® is the most powerful GUI configuration tool for Asterisk. It provides everything that a standard legacy phone system can, plus a huge amount of new features.
  FreePBX® is a Registered Trademark of Schmooze Com, Inc. For more details visit www.freepbx.org and www.schmoozecom.com.


pkgId: ab73a62a739fc51d93dc9d370e3c59660e8bc80b30f7ac0e549b36a3e04bc149
name: RoundCubeMail
arch: noarch
version: 0.3.1
epoch: 0
release: 12
summary: RoundCube Webmail is a browser-based multilingual IMAP client
url: http://www.roundcube.net
rpm_license: GNU General Public License (GPL)
rpm_group: Applications/Internet
rpm_buildhost: localhost
rpm_sourcerpm: RoundCubeMail-0.3.1-12.src.rpm
location_href: RPMS/RoundCubeMail-0.3.1-12.noarch.rpm
checksum_type: sha256
description:
  RoundCube Webmail is a browser-based multilingual IMAP client with an application-like user interface. It provides full functionality you expect from an e-mail client, including MIME support, address book, folder manipulation, message searching and spell checking. RoundCube Webmail is written in PHP and requires the MySQL database. The user interface is fully skinnable using XHTML and CSS 2.


pkgId: 7636412b6e9a9c8b337c7efcfaae3bd51af2d0d95617cc5695268dc65f531eed
name: asterisk-perl
arch: noarch
version: 1.03
epoch: 0
release: 0
summary: A perl agi interface module for asterisk
url: http://asterisk.gnuinter.net/
rpm_license: GPL
rpm_group: Applications/Internet
rpm_buildhost: localhost
rpm_sourcerpm: asterisk-perl-1.03-0.src.rpm
location_href: RPMS/asterisk-perl-1.03-0.noarch.rpm
checksum_type: sha256
description:
  asterisk-perl is a collection of perl modules to be used with the Asterisk
  PBX, an open source pbx system developed by Mark Spencer.


# files

type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/upload.sh


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/to_test_system.bat


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/sources


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/sangoma_interface.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/sangoma_interface.cpp


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/resource.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/release.sh


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/leak_analysis.cpp


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/driver_configurator.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/driver_configurator.cpp


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/compile.bat


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/buildchk_wxp_x86.log


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/SangomaPort.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/SangomaPort.cpp


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/SangomaCard.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/SangomaCard.cpp


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/ReadMe.txt


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/PortBuffer.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/PortBuffer.cpp


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/Makefile.Linux


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/regression/SangomaHandleLeakAnalysis/ChannelizedBuffer.h


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/_UpgradeReport_Files/UpgradeReport_Plus.gif


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/_UpgradeReport_Files/UpgradeReport_Minus.gif


type: file
name:
  /etc/wanpipe/api/libsangoma/examples/sample_data_tapping/Sangoma/Code/Sangoma/driver_configurator.cpp


